ceramic water permeable brick
Specifications
Compressive strength >50MPa
Water-penetrating: 131L Per square metre per minute
Ceramic Water permeable brick
1. Use ceramic materials and ceramic materials secondary high temperature fired.
2.After two more than 1000 degrees high temperature firing, high strength resistance, compressive strength in 50MPA above average.
3. Porous: sintered ceramic material products due to repression by the different size from high temperature, with a gradient of porosity, permeability, breathable.
4. Permeable degrees: 0.131ml.cm/cm2.s, this value is the other laying products can not be achieved
5. The color intensity: the product is made of high temperature toner at room temperature with no fade, yellow sand used can not be replaced by other products.
6 Stability: high temperature sintering temperature without radiation.